







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with







See the difference
Before
After
Before
After
Before
AfterHow Much Does Aluminum Fence Installation Cost in Miami?
Aluminum fence installation in Miami typically costs between $4,720 and $11,800 for a standard residential property, with most homeowners landing around $32 to $48 per linear foot including materials and labor. For a typical 150-linear-foot backyard enclosure, you’re looking at a realistic budget of $5,500 to $8,500 installed. The final number depends on your soil conditions, gate count, and whether you choose a basic residential-grade panel or a heavier commercial-grade extrusion.
We put the price in writing before any work starts, so you’ll know your exact number before a single post hole is dug. Call (850) 801-8046 for a free estimate based on your actual property, not a ballpark guess.

Aluminum Fence Installation Cost Breakdown (2026)
Here’s what you’re actually paying for when you install an aluminum fence in Miami. These ranges reflect what we’re seeing across Dade County in 2026, from Kendall to Coral Gables to Homestead.
| Cost Component | Typical Range (Miami, 2026) | Notes |
|---|---|---|
| Aluminum fencing panels (materials only) | $18 – $35 per linear foot | Residential grade starts around $18/ft; commercial or ornamental grade runs $28 – $35/ft. |
| Posts and hardware | $8 – $14 per linear foot | Includes posts, brackets, screws, and post caps. Heavier posts cost more. |
| Labor and installation | $10 – $18 per linear foot | Digging, setting posts in concrete, hanging panels, and leveling. |
| Gate(s) | $350 – $1,200 each | Single walk gate at the low end; double drive gate at the high end. |
| Permit fees (Miami-Dade) | $150 – $500 | Varies by municipality; some cities in the county charge flat fees, others a percentage of project cost. |
| Old fence removal and disposal | $3 – $6 per linear foot | Only if you have an existing fence to pull out. Chain link removal runs on the lower end. |
So for a 150-linear-foot project with one walk gate, you’re at roughly $5,400 to $8,900 all-in. Add a double drive gate and you’re knocking on $10,000. Remove an old fence and haul it away, and that adds another $500 to $900.
What moves the number most? Panel grade is the biggest lever. A basic 4-foot residential panel from a big-box supplier lands around $18 per linear foot in Miami right now. A 6-foot ornamental-grade panel with a thicker gauge and architectural styling runs $30 to $35 per foot. That’s a $1,500 difference on the same yard.
Soil matters in Miami more than people expect. We set posts in concrete at least 24 inches deep, and in parts of Dade County the ground is loose, sandy fill. That sometimes means deeper holes and more concrete than you’d need further inland. In neighborhoods built on limestone caprock, like parts of Pinecrest, drilling takes longer and eats more drill bits. We’ll tell you upfront if your soil is going to add to the labor number.
What Affects Aluminum Fence Installation Pricing in Miami
Every yard is different, and so is every quote. Here are the factors that actually move the price, not the ones contractors mention to sound complicated.
- Linear footage and fence height. More feet costs more, obviously. But height changes material cost per foot meaningfully. A 4-foot fence runs $18 – $25 per linear foot for panels; a 6-foot fence runs $24 – $35. That’s the difference between a $4,700 fence and a $7,000 fence on the same line.
- Soil conditions in your specific neighborhood. Coral Gables and South Miami sit on limestone caprock that slows drilling. Kendall and Westchester have sandy, loose soil that’s fast to dig but needs more concrete per hole. Homestead and the Redland have marl soil that’s somewhere in between. Your soil directly changes the labor number.
- Gate count and gate type. A standard walk gate adds $350 – $600. A double drive gate with a stronger frame and hardware can push $1,200 on its own. The more gates, the more the price climbs.
- Panel grade and finish. Residential panels come in lighter gauges and simpler designs. Commercial or ornamental panels come in heavier extrusions with spear-top pickets, finials, and stronger rails. Miami’s salt air eats cheap powder coating, so we typically recommend a marine-grade finish near the coast, which adds about $3 – $5 per linear foot but lasts materially longer. In bayside neighborhoods like Coconut Grove and Key Biscayne, that finish isn’t an upgrade, it’s the standard if you don’t want corrosion within four years.
- Existing fence removal. If there’s an old wood or chain link fence on the line, someone has to pull it, break up the old footings, and haul the debris. That runs $3 – $6 per foot depending on how stubborn the old posts are.
- Permitting jurisdiction. Some Miami-Dade municipalities, like the City of Miami and Miami Beach, have stricter fencing codes (including height and setback rules) and charge more for permits. We handle the permit work and the number is in your written price, not a surprise addition later.
Why Aluminum Is the Right Call for Miami’s Climate
We’ve installed fencing across Miami for the better part of two decades, and we’ll tell you something wood-fence salespeople won’t: untreated wood in this humidity warps and rots within five to seven years, and termites in Dade County treat a cedar fence like a buffet. Aluminum doesn’t rust, doesn’t warp, doesn’t feed termites, and doesn’t need staining every two years. It costs more upfront than pressure-treated pine, but in Miami, the pine fence is the more expensive fence by year six.
One thing to check for, especially within a mile of Biscayne Bay: the powder coating spec. We specify panels with a marine-grade AAMA 2604 finish for coastal installs. It’s the same standard used on aluminum window frames in oceanfront condos. If a quote looks suspiciously cheap near the water, ask what finish they’re quoting. Salt air will find cheap powder coat and start pitting it within three years.

Aluminum vs. Other Fence Types in Miami: Cost Comparison
If you’re on the fence about aluminum (no pun intended), here’s how it stacks up against the alternatives in the current Miami market.
- Aluminum: $4,720 – $11,800. Highest upfront cost among common residential fences, lowest lifetime cost. Zero maintenance, no rust, no rot, no termite risk.
- Vinyl: $4,130 – $10,620. Similar look to aluminum but with more flex. Miami’s UV exposure yellows cheap vinyl within five years, and hurricane-force gusts can snap panels that flex too far. We do vinyl fence installation in Miami as well, and we recommend it for select applications, but aluminum wins on longevity here.
- Pressure-treated pine: $2,500 – $6,500. Cheapest upfront. But in Miami’s humidity and termite pressure, you’ll replace or heavily repair it within five to eight years. By year ten you’ve spent more than the aluminum fence cost you’d have paid once.
- Chain link: $1,800 – $4,500. Functional but zero privacy, no curb appeal, and it does nothing for resale. Fine for dog runs; not what most Miami homeowners want on a property line.
The arithmetic matters: if you plan to be in the house more than six years, aluminum is usually the cheapest fence you’ll ever own. If you’re prepping to sell next year, it’s also one of the few improvements that returns visible curb appeal without waiting for paint to cure.
How to Save on Aluminum Fence Installation
We’re not going to pretend you should “save money” by doing this yourself. Setting 25 to 50 posts in concrete, in Miami’s summer heat, on a property line that may or may not match your survey, is how people end up with a wavy fence and a neighbor dispute. But there are legitimate ways to keep the number down without cutting corners.
Time It Right
Fence pricing in Miami follows a seasonal pattern. Demand spikes from March through August, when everyone’s hurricane-prepping and sprucing up for summer. If you can schedule your install between September and February, our calendar tends to have more flexibility and material prices from suppliers are often marginally lower. You won’t see a 30% discount, but you might see $300 – $700 of breathing room on a typical project.
Right-Size the Fence
A 4-foot fence on the front property line and a 6-foot fence in the back is a standard configuration in Miami, and it costs less than running 6-foot panels the whole way around. Think about what you’re actually securing: front yards in Coral Gables and the Roads often look better with a lower, more open line anyway, and the shorter panels save you $6 – $10 per foot.
Minimize Gate Count
Every gate is a separate installation with its own posts, hinges, and alignment work. One wide drive gate and one walk gate does the job on most lots. Three gates is where the number starts creeping up for no functional benefit.
Get the Permit Right the First Time
Miami-Dade municipalities enforce fence height and setback rules, and a failed inspection means rework. We pull the right permit for your municipality and line your fence up to apply, not to appeal. A written price includes the permit, so it’s handled the first time.
Bundle With Other Work
If you’re already planning a paver patio installation in Miami or a paver driveway, combining the projects reduces mobilization costs and sometimes opens up material discounts. Mobilization, the cost of getting a crew and equipment to your site, is charged once instead of twice.
The simplest way to get the best number? Call (850) 801-8046 for a free on-site estimate. We measure, check the soil, confirm the property line, and hand you a written price the same day. No callbacks, no “we’ll have to see.”
FAQs – Aluminum Fence Installation Cost
How much does aluminum fence installation cost per linear foot in Miami?
Aluminum fence installation runs $32 to $48 per linear foot installed in Miami as of 2026, meaning a 100-foot fence starts around $3,200 and a 200-foot fence approaches $9,600 before gates. The installed number includes panels, posts, concrete, hardware, and labor. Gates, permits, and old-fence removal are line items above that. Call (850) 801-8046 for a firm per-foot quote on your exact property line.
Is it cheaper to repair or replace an aluminum fence in Miami?
For anything under 20% of the total fence line showing damage, repair usually wins: replacing a bent section or a few posts runs $300 – $1,200 depending on what’s damaged, while a full replacement on a 150-foot fence runs $5,500 – $8,500. If more than a quarter of the panels are damaged or the posts are pulling loose from the concrete, replacement typically costs less per remaining year of use than repeated patch jobs. If you’re not sure which side of the line you’re on, our aluminum fence installation in Miami page covers repair scope decisions, or call us for an honest assessment.
Can aluminum fence installation be done the same week?
Yes, most Miami residential aluminum fence installations can be scheduled within five to ten business days depending on material availability and permit turnaround. Standard 4-foot and 6-foot residential panels are typically in stock with our Miami suppliers, and straightforward permits in most Dade municipalities clear within a few business days. Custom-height panels, coastal-grade finishes, or projects in municipalities with slower permitting, like Miami Beach, can push scheduling to two or three weeks. We’ll confirm your timeline at the estimate, and our team tracks a live arrival time so you’re not waiting on a four-hour window.
Do I need a permit for an aluminum fence in Miami?
Yes, most municipalities in Miami-Dade County, including the City of Miami, Coral Gables, Kendall, and Homestead, require a permit for any fence over 3 feet tall, and many have specific rules about fence height, setback from the property line, and which side of the fence faces outward. We pull the permit for your specific municipality and include the permit fee in our written price, so there’s no separate line item or surprise bill after the fact. Unpermitted fences in Miami can be flagged during resale, which is an expensive problem to fix years later.
Does aluminum fencing hold up to Miami hurricanes?
Good-quality aluminum fence installed properly in Miami holds up well to hurricane-force wind conditions, because aluminum flexes and returns to shape rather than cracking like vinyl or splintering like wood. The critical variable is post depth and concrete: in sandy Dade County soil, we set posts at least 24 inches deep and often deeper for wind-exposed properties, which keeps the fence line straight through a named storm that a shallow-set fence won’t survive. Marine-grade powder coating matters too, especially within a mile of the bay, where salt air accelerates corrosion on cheap finishes.
Why Miami Homeowners Use Sawyer Remodel for Aluminum Fences
We’re Sawyer Remodel Miami, part of the Relay Home Co. family since 2005, and our aluminum fence work is run under The Relay Visibility Guarantee: a live arrival time, photo updates before and after, and a written price before we start. You won’t get a low verbal quote that balloons at the invoice. You’ll get a number on paper, approved by you, before the first shovel breaks ground.
Every fence job includes our 365-Day Done Right Promise. If it’s not done right, we make it right, and that’s in writing, not a handshake. If a repair fails within the year, the second visit is free, covered, no argument. Our techs are background-checked and uniformed, so you know who’s walking onto your property before they arrive. And when you call, a live person answers, 24/7, no voicemail loop.
For aluminum fence specifically, we pull the permit, we check the property line against your survey, we pour the concrete deep enough for Miami’s wind and soil, and we specify the finish that matches your distance from the salt. That’s the difference between a fence that looks great for one year and one that looks the same in ten.
Ready for a real number? Call (850) 801-8046 for a free, on-site estimate. You’ll get a written price the same day, and if the number doesn’t work for you, there’s no pressure and no follow-up harassment. Just math.
Pricing reflects the Miami market as of 2026. Sawyer Remodel Miami offers free estimates – call (850) 801-8046.
Written by Luca Romano, Owner at Sawyer Remodel Miami, serving Miami since 2005.
What Our Customers Say
"Quote was itemized and every change was approved in the app."
- Sasha L."Floors and paint finished on time. Floors were sanded, stained, and the walls painted without any gaps in the schedule."
- Ron T."Straight talk and simple communication. Every question got an answer by text within the hour."
- Cherie A.











