Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Miami Homeowners Choose Therma-Tru Construction
Miami Therma Tru service for door repair and installation is what we do every week, not occasionally. We’re Sawyer Remodel Miami, an independent Therma-Tru service provider, and we fix the specific ways these doors fail in our salt-heavy, high-humidity, hurricane-code environment. If you own a Classic-Craft, Fiber-Classic, Pulse, or Smooth-Star door in Miami and it’s binding, dragging, corroding at the hinges, or leaking wind-driven rain at the threshold, call (850) 801-8046 and we’ll come look at it.
We are not affiliated with or authorized by Therma-Tru. That’s a feature, not a bug. It means we recommend what actually works in Miami’s coastal conditions, not what a corporate parts list says you should buy. Luca Romano, our owner and lead contractor, learned the trade at Los Angeles Trade-Technical College and has spent years running job sites in Miami. He’ll tell you straight if a door is worth repairing or if you’re throwing money at a slab that should have been replaced three hurricanes ago.
- We service all major Therma-Tru lines: Classic-Craft, Fiber-Classic, Pulse, and Smooth-Star.
- Miami’s salt air corrodes door hardware faster than inland locations – we use marine-grade replacements where they make sense.
- We’re independent, not a Therma-Tru dealer. We recommend repairs based on what lasts in Miami, not what moves inventory.
- Written price before work starts, every time. That’s the Relay Standard.
Why Trust Sawyer Remodel Miami for Your Therma-Tru Construction?
Here’s what separates a door company that “also does Therma-Tru” from a crew that knows these doors inside and out. Our technicians have installed, repaired, and weather-sealed Therma-Tru doors across Miami-Dade for over a decade. That decade taught us things manufacturer spec sheets don’t tell you. We know, for instance, that the factory bottom sweep on a Classic-Craft door will fail years earlier in Brickell than it will in Orlando, because salt spray eats the fasteners and wind-driven rain works its way under the seal. We know that the hinge screws on a Pulse full-glass door will loosen from wind buffeting during hurricane season even if the door was installed perfectly. These are specific failure patterns you only learn from turning a thousand door slabs in coastal air.
Luca Romano built his name on straight cuts and honest timelines. When you call us about a Therma-Tru door that’s dragging, we don’t sell you a new door by default. We diagnose first. We look at the slab, the jamb, the threshold, the hinges, and the weatherstripping as a system. Then we tell you what actually needs to happen. That’s how we’ve earned the trust of homeowners from Therma Tru repair in Coral Gables to Brickell to Shenandoah.
Every job runs under The Relay Visibility Guarantee: live arrival time, photo updates before and after, and a written price before a single tool is picked up. The 365-Day Done Right Promise backs it in writing. If it’s not done right, we make it right. No argument, no renegotiation.
Styles & brands we work with
Common Therma-Tru Construction Problems We Fix in Miami
These are the five failure modes we see most often on Therma-Tru doors in Miami. If yours is doing any of these, it’s not your imagination and it’s not normal wear you should tolerate.
- Bottom sweep and threshold seal fatigue from wind-driven rain. On Classic-Craft and Fiber-Classic doors, the factory bottom sweep is designed for typical rainfall. Miami’s summer storms drive rain sideways, and salt spray accelerates the breakdown of the rubber and the aluminum retainer. The door still closes fine, but water pools on the interior floor during storms. This is the single most common service call we run.
- Hinge loosening on full-glass Pulse Series doors. The Pulse line uses heavier glass panels than most homeowners expect. Add Miami’s wind load during hurricane season, and the hinge screws work themselves loose over time. The door starts to sag, the strike plate becomes a frustration, and eventually the slab binds. We re-set the hinges with longer stainless steel screws and re-align the slab at the strike jamb.
- Warping and delamination of fiberglass skins. Prolonged direct sun combined with high humidity cycles takes a toll on fiberglass door skins, especially on doors that face east or west without an awning. The skin can pull away from the core at the edges, creating air gaps that let moisture inside the door itself. We’ve seen doors in Miami that looked fine from ten feet away and were delaminating badly at the corners.
- Corrosion of door shoe fasteners and adjustment screws. Miami’s salt-laden air is brutal on small metal components. The adjustment screws on the door shoe, the hinge pin bushings, and the strike plate screws all corrode faster here than anywhere else in Florida. When those fasteners seize, the door can’t be adjusted properly. We replace corroded hardware with stainless or marine-grade components during every repair.
- Threshold failure on aging prehung installations. On older homes in neighborhoods like Little Havana and Shenandoah, the threshold is often the original aluminum piece from a 1990s-era install. Salt and standing water from storm splash degrade it over time, and the seal underneath fails. You end up with water, ants, and air infiltration all at once. We rebuild the threshold, replace the corner pads, and install a fresh sweep in one service visit.
Therma-Tru Parts & Our Repair-vs-Replace Approach
Here’s our honest stance on parts, because nobody else in Miami will tell you this. We use OEM Therma-Tru parts – door panels, hinges, weatherstripping – when they’re available and they’re the right call. But for high-wear items like bottom sweeps and corner seals, we often source marine-grade aftermarket replacements. Here’s why: OEM sweeps are built for national average conditions. Miami’s salt air and wind-driven rain are not national average conditions. A marine-grade sweep, built for constant saltwater exposure, will outlast the OEM part by two or three seasons in coastal Miami. We stock both.
When it comes to repair versus replace, the threshold is simple. If the slab and jamb are sound – meaning no rot, no frame twist, no impact damage beyond surface level – we repair. You keep your door, we replace the worn parts, and the job costs hundreds of dollars instead of thousands. If rot, frame twist, or impact damage exceeds 30% of the door assembly, full replacement is more cost-effective. Patching a door that’s structurally compromised is throwing money away. We’ll tell you which situation you’re in, and we’ll show you why. Call (850) 801-8046 and we’ll come assess it.
Our Therma-Tru Service Process – Step by Step
- 1
Diagnosis. We inspect the slab, jamb, threshold, hinges, weatherstripping, and strike plate as one system. For Therma-Tru doors specifically, we check the corner pads, the door shoe fasteners, and the bottom sweep retainer – components most homeowners never think about until water is on the floor.
- 2
Written quote. Before any work starts, you get a written line-item price. Not an estimate you hope holds, a written price. The Relay Standard. If we find something unexpected during the job, you hear about it before we touch it.
- 3
Repair or install. We use OEM Therma-Tru parts where it matters and marine-grade replacements where Miami’s conditions demand it. Every hinge, screw, and seal gets checked for corrosion. If it’s corroded, it gets replaced with stainless.
- 4
Testing. We run the door through full open-close cycles, simulate water flow at the threshold, and check for air infiltration along the jamb. We don’t consider the job done until the door operates smoothly and seals tight.
- 5
365-Day Done Right Promise. Every repair and install is backed in writing for a full year. If something isn’t done right, we make it right. That’s the promise.
See the difference
Before
After
Before
After
Before
AfterTherma-Tru Products We Service & Install in Miami
We work on every major Therma-Tru line sold in the Miami market. Classic-Craft Mahogany Collection doors, with their wood-grain fiberglass finishes, are a regular part of our week. Fiber-Classic Mahogany Collection doors are the workhorse of Miami’s mid-century concrete-block homes, and we see plenty of those. The Pulse Series, with its modern full-glass configurations, is increasingly common in newer builds and condo renovations. And Smooth-Star Series doors, with their clean contemporary finish, show up in high-rise units and updated older homes.
Beyond doors, we service and install the related systems: weatherstripping, thresholds, corner pads, door shoes, hinge systems, and strike plates. We stock common Therma-Tru replacement components locally, so most repairs don’t wait on a parts shipment from a distributor.
We Also Service These Brands
While Therma-Tru is our specialty on the door side, Sawyer Remodel Miami is a General Contractor. We also work with KraftMaid and Wellborn cabinetry, Cambria and Caesarstone countertops, and Kohler fixtures. If your Therma-Tru door repair is part of a larger entryway or exterior project, we can handle the whole scope.
FAQs – Therma-Tru Construction Service in Miami
Yes. Fiberglass doors don’t warp like wood doors do, but the skins can delaminate from the core when exposed to prolonged direct sun combined with Miami’s humidity cycles. Doors facing east or west, with no awning or overhang, are most at risk. We’ve replaced door slabs in Miami that never saw a drop of direct rain but still developed skin separation at the corners because the heat and humidity broke down the adhesive bond over time. If you see bubbling or peeling at the edges of your door panel, that’s delamination starting. Call (850) 801-8046 and we’ll assess whether it’s repairable or if the slab needs replacement.
In most cases, we replace just the slab. If the jamb is solid, the threshold is in good condition, and the hinges are not compromised, a new door slab drops into the existing frame and we’re done. Slab replacement for a Classic-Craft door in Miami typically runs $2,360 to $5,310. Replacing the whole prehung system costs more because you’re paying for the jamb, threshold, and installation labor – typically $4,130 to $10,620. The deciding factor is the condition of the frame. If the frame is twisted or rotted, a slab-only replacement won’t fix the underlying problem and the door will bind again within a year. We’ll show you which route makes sense before you spend a dollar.
The bottom sweep and threshold seal. Salt spray from the ocean accelerates rubber fatigue, and wind-driven rain during summer storms forces water under the threshold seal. The result is water pooling inside the door during heavy rain. It’s a simple fix – we replace the sweep, rebuild the threshold, and install marine-grade corner pads – and it typically costs $295 to $825. The key is catching it early. If you let water sit on the threshold repeatedly, it works its way into the door shoe fasteners, corrodes them, and the repair becomes more involved.
It depends on the door model and the existing frame. Some Therma-Tru Classic-Craft and Fiber-Classic doors can be retrofitted with impact-rated glass and reinforced hardware to meet Miami-Dade HVHZ requirements. Others cannot, either because the frame doesn’t have the structural capacity or because the door design doesn’t support impact glazing. We’ll evaluate your specific door and tell you honestly if retrofitting is viable. If it’s not, we install impact-rated Therma-Tru door systems as a full replacement, starting at $5,310. In Miami’s wind zone, this is not an optional upgrade if your door faces an exposure that gets direct wind during storms.
For hinges, yes, we use authentic Therma-Tru components when we can source them quickly. But here’s where our independent status matters: for high-wear items like handles, bottom sweeps, and corner seals exposed to Miami’s salt air, we often recommend marine-grade aftermarket components that hold up better than the factory parts. We won’t put a cheap knockoff on your door. But we also won’t put an OEM part on that we know will corrode in two seasons when a better option exists. You get a written quote that specifies exactly what we’re installing, and we’ll explain the trade-offs before you approve anything. Call (850) 801-8046 for an exact quote – estimates are free.
Here’s the honest pricing table for common Therma-Tru service we perform in Miami:
| Service | Miami Price Range |
|---|---|
| Therma-Tru door slab replacement (Classic-Craft) | $2,360 – $5,310 |
| Therma-Tru entry door prehung install | $4,130 – $10,620 |
| Weather-stripping and threshold rebuild | $295 – $825 |
| Impact-rated Therma-Tru door install | $5,310 – $14,160 |
These are real Miami market prices, not login-wall estimates. Your exact quote depends on the door model, the condition of the existing frame, and whether impact glazing or additional weatherproofing is required. We give you a written price before any work starts, and that number is the number on your invoice. No change orders, no surprise add-ons.
Book Your Therma-Tru Service in Miami, FL
Your Therma-Tru door is the first thing between your home and Miami’s wind, rain, and salt air. If it’s leaking, binding, or corroded, don’t let it wait until the next storm. Call (850) 801-8046 for a free estimate, and we’ll come out, diagnose the problem, and put a written price in your hands before we pick up any tools.
Written by Luca Romano, Owner at Sawyer Remodel Miami, serving Miami since 2005. Good work doesn’t need a sales pitch.
