Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Boral Kitchen Remodeling: The Miami Owner’s Guide
Boral kitchen remodeling in Miami typically costs $16,520 to $53,100 installed, depending on cabinet layout, countertop material, and how much of the existing kitchen has to be demoed. We stock and install Boral-compatible components, and most homeowners call us when cabinet doors start sagging, drawer slides bind, or the laminate edge on a countertop starts peeling back in Miami’s humidity. The usual discovery moment: a hinge snaps on a heavily-used base cabinet, or a soft-close drawer stops closing quietly and starts slamming.
When a Boral kitchen component fails, it’s rarely the whole kitchen. It’s one cabinet face, one drawer box, one section of edging that South Florida’s moisture found a way into. That’s what this page is about: matching the failed part to your Boral setup, pricing it honestly, and getting it installed without turning a repair into a full rebuild you didn’t ask for.
Key Takeaways:
- Installed Boral kitchen remodeling in Miami runs $16,520 – $53,100, with smaller-scope repairs priced separately
- Miami humidity is the #1 killer of Boral laminate edges and MDF-core cabinet boxes
- We match OEM Boral parts or use aftermarket equivalents that meet the same spec
- Written price before any work starts, per The Relay Visibility Guarantee
Which Boral Models This Applies To
Boral kitchen products span several lines that show up in Miami homes: the Boral cabinet systems spec’d into mid-2000s condo builds in Brickell and Coral Gables, plus the later laminate and stone-look countertop lines installed throughout single-family homes in Kendall, Doral, and Westchester. The compatibility gotcha most homeowners miss: Boral changed cabinet box construction around 2012, moving from particleboard cores to denser MDF cores. A 2010 Boral drawer and a 2015 Boral drawer may look identical from the outside, but the mounting clips don’t interchange. We identify the right part by pulling a drawer and checking the stamped code on the box underside, then measuring the door overlay and hinge cup diameter.
The OEM vs. aftermarket decision matters here. Boral no longer distributes replacement parts directly to consumers in most cases, so we work with aftermarket manufacturers who machine to the exact same bore patterns and edge profiles. For cabinet doors and drawer fronts, OEM is worth chasing when you need a perfect finish match. For hinges, slides, and drawer boxes, a quality aftermarket part installs faster and often outlasts the original because today’s soft-close hardware is better than what shipped on a 2008 Boral cabinet.
We also install and stock components for KraftMaid, Cambria, and Silestone kitchens, so if your Boral cabinets backed up to a Cambria countertop, we can handle the full scope without juggling multiple contractors.
Styles & brands we work with
Signs Your Boral Kitchen Remodeling Is Failing
- Cabinet doors sag or won’t stay closed. The hinge cup has wallowed out of the MDF core, usually from years of Miami’s humidity swelling and contracting the wood fiber. A new hinge won’t fix it; the cup hole needs to be re-bored or the door replaced.
- Drawer slides bind or grind. The soft-close damper inside the slide has blown out, or the nylon roller wheel flattened. This is the most common Boral failure we see, especially on the 36-inch pot-and-pan drawers that carry real weight.
- Laminate edges on countertops are peeling. South Florida moisture gets under the edge banding, breaks down the adhesive, and the strip curls back. Once it starts, it spreads because the exposed MDF underneath is a sponge.
- Soft-close drawers now slam. The damper is done. You can keep using the drawer, but every slam vibrates the cabinet box and loosens the joinery on the face frame.
- Cabinet boxes are swelling at the toe kick. That’s water wicking up from floor cleanings or a slow leak under the sink. The bottom rail expands, the doors start rubbing, and in Miami’s climate this accelerates fast.
Replacement Cost & What’s Included
Here’s what Boral kitchen remodeling in Miami actually costs, installed:
| Scope | Typical Installed Cost |
|---|---|
| Cabinet hinge replacement (per door) | $30 – $90 |
| Drawer slide replacement (per drawer) | $45 – $140 |
| Cabinet door replacement (per door) | $180 – $520 |
| Countertop edge repair | $240 – $710 |
| Partial cabinet box replacement | $940 – $2,950 |
| Full Boral kitchen remodel | $16,520 – $53,100 |
The spread comes down to whether you’re replacing one hinge or rebuilding a run of base cabinets, and whether we’re installing aftermarket hardware or matching OEM Boral finishes. Every quote includes parts, labor, haul-away of the old components, and a written price before any work starts. If it’s not done right, the 365-Day Done Right Promise means we make it right. No change orders, no re-quote at the door.
Sawyer Remodel Miami is an independent service provider. We’re not affiliated with Boral, but we’ve worked on enough of their kitchens across Miami to know exactly which parts fail, which parts interchange, and which ones just need to be replaced outright.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
Here’s the honest split. You can safely adjust hinge tension screws, tighten loose handle hardware, and clean caked grease out of the soft-close damper. Those are five-minute fixes that don’t require tools beyond a Phillips driver. What you shouldn’t do is re-bore a wallowed hinge cup, replace a drawer slide set where the mounting screws spin, or try to glue back peeling laminate edge with construction adhesive. The first two require jigs and precise tolerances; the third almost always leaves the edge looking worse than when you started, and now we’re pricing a full countertop replacement instead of a repair.
If the drawer is on the floor, the cabinet box is swelling, or the door won’t stay on the cabinet, that’s the point to call (850) 801-8046. We’ll tell you on the phone whether this is a $90 hinge job or a bigger cabinet issue, and you’ll get a written price before we touch anything.
Good work doesn’t need a sales pitch.
FAQs
Boral cabinets in Miami typically last 15 to 25 years before the combination of humidity, salt air, and daily use starts breaking down hinges, slides, and MDF cores. The hardware usually fails before the boxes do, which is why matched replacement parts extend the life of the original kitchen further than most homeowners expect. Call (850) 801-8046 and we’ll assess whether your Boral kitchen is worth repairing or has hit the point where a remodel makes more sense.
Hinges can sometimes be re-seated with a quality bore repair kit, but drawer slides and blown soft-close dampers are replace-only items. The honest answer depends on whether the cabinet box material around the hardware is still sound, and we’ll tell you which path costs less before any work is approved. Estimates are free.
A single drawer slide or hinge replacement takes under an hour once we’re on site. A cabinet box replacement typically runs half a day, and a full Boral kitchen remodel in Miami runs two to six weeks depending on countertop lead times and whether we’re reconfiguring the layout. You’ll get a written timeline with your written price, plus photo updates before and after per The Relay Visibility Guarantee.
We keep the most common Boral hinge types, soft-close slide sets, and drawer box hardware on our trucks, because those are the parts Miami kitchens chew through fastest. Cabinet doors and drawer fronts matched to a specific Boral finish are ordered per job. Call (850) 801-8046 with your cabinet’s stamped code or a photo, and we’ll tell you if we can grab it off the truck or need to order it.
Ready to Fix Your Boral Kitchen?
If your Boral kitchen has a door that won’t stay shut, a drawer that slams, or laminate peeling at the edges, call Sawyer Remodel Miami at (850) 801-8046. We’ll ask a few questions, give you a straight answer on what it costs, and schedule a time that works. You’ll know who’s coming, when they arrive, and what the price is before a single tool comes off the truck. That’s The Relay Standard, and it’s been how we’ve worked since 2005.
Written by Luca Romano, Owner & Lead Contractor, Sawyer Remodel Miami at Sawyer Remodel Miami, serving Miami and nearby areas. Luca learned the trade at Los Angeles Trade-Technical College and has spent decades running job sites across the country before putting down roots in Miami, where he and his crew gut and rebuild kitchens from Coral Gables to Brickell.
