Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Oldcastle Kitchen Remodeling: The Miami Owner’s Guide
Oldcastle kitchen remodeling in Miami typically runs $16,520 – $53,100 for a full replacement, depending on cabinet layout, countertop material, and whether existing plumbing or electrical needs repositioning. We stock Oldcastle-compatible cabinet components, hardware, and trim, and our install crews handle the full scope: removal, framing adjustments, installation, and finish work. Most Miami homeowners discover their Oldcastle kitchen has failed when drawer slides bind, cabinet boxes pull away from the wall, or the finish on doors starts peeling in the humidity that hits this city from May through October.
We’re an independent contractor, not affiliated with Oldcastle, which means we’re free to tell you when a part is worth saving and when it’s not. Luca Romano has torn enough kitchens apart in Coral Gables and Brickell to know the difference. Here’s the full breakdown, from part identification to pricing to what you should absolutely not try fixing yourself.
Key Takeaways:
- Full Oldcastle kitchen remodels in Miami range from $16,520 for a modest galley to $53,100 for a larger L-shaped or island kitchen with upgraded counters.
- We install Oldcastle-compatible parts with a written price before work starts, backed by our 365-Day Done Right Promise.
- Miami’s humidity is the number one killer of Oldcastle cabinet finishes and MDF components. We’ll tell you which parts hold up and which don’t.
- Call (850) 801-8046 and a live person answers. No voicemail, no callback queue.
Which Oldcastle Models This Applies To
Oldcastle kitchen products come through several series lines, and the compatibility question is where we see the most confusion. The two most common we work on in Miami homes are the Oldcastle Classic series and the Oldcastle Pro line. Classic uses a 5/8-inch shelf panel thickness and side-mount drawer glides. Pro line upgrades to 3/4-inch panels and full-extension undermount slides. You can’t mix the two: Pro drawer hardware won’t mount into Classic cabinet boxes without a retrofit plate, and Classic doors won’t align to Pro face frames at the hinge bore offset.
Here’s the checkable spec: hinge bore spacing on Oldcastle Classic doors is 45mm; Pro line runs 52mm. Measure before you order anything. We measure twice, and we still check the boring from the original door before quoting a replacement. If your cabinets have a label inside the sink base cabinet or behind the top drawer, that’s your series identifier. If there’s no label, send us a photo. Luca can usually identify the line from hinge cup placement and the shelf pin size.
OEM versus aftermarket matters more for Oldcastle than most brands. Oldcastle’s factory finish on Classic doors uses a catalyzed lacquer that’s hard to match. Aftermarket doors with a standard conversion varnish will be slightly glossier or flatter and age differently under Miami’s UV exposure. For drawer slides and hinges, we’re happy to use quality aftermarket equivalents (Blum and Salice both make retrofit models that fit Oldcastle boring patterns). For visible surfaces, we recommend OEM or a full door-and-drawer-front replacement as a set so the finish matches across the kitchen.
Styles & brands we work with
Signs Your Oldcastle Kitchen Remodeling Is Failing
- Drawer slides bind or stick at the halfway point. Miami’s humidity causes the ball bearings in cheap slides to oxidize, especially after a few rainy seasons with poor kitchen ventilation. The fix is usually a full slide replacement, not a lubricant.
- Cabinet boxes pull away from the wall at the top rail. Original installs frequently used too few anchors at the rail, and daily drawer slamming finishes the job. In older Miami buildings with lath-and-plaster walls, this happens faster. Check for a gap between the cabinet back panel and the drywall.
- Doors won’t stay closed or hang crooked. If adjusting the hinge screw doesn’t correct the alignment within three turns, the hinge cup is wallowed out. Once an Oldcastle hinge cup bores out the pressed-wood fiber, there’s no fixing it. You replace the hinge, or the door will sag again.
- Finish peeling or bubbling at the bottom edge of doors. Water from steamy pots and Miami’s baseline humidity seeps into the unsealed bottom edge of Oldcastle Classic doors. Once the lacquer lifts, the MDF core swells and no amount of touch-up paint will hide it.
- Shelves sagging in the middle. Classic series shelves are 5/8-inch composite board with a metal stiffener bar. If the bar is missing or the shelf clips are in the wrong pins, even a loaded pantry shelf will bow permanently within a year.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
| Scope of Work | Price Range (Miami) |
|---|---|
| Cabinet installation (labor, reuse existing boxes/doors) | $4,720 – $15,340 |
| Countertop installation (material + labor) | $2,360 – $7,670 |
| Backsplash installation | $945 – $2,950 |
| Kitchen island installation | $3,540 – $11,800 |
| Full Oldcastle kitchen remodel | $16,520 – $53,100 |
The range in a full Oldcastle remodel comes down to three things: cabinet count and configuration, countertop material (Caesarstone and Cambria run higher than a standard laminate), and what we find behind the old cabinets when we open the walls. Miami homes built before 1995 often have plumbing routes or wiring that need moving to meet current code, and that’s the line item that pushes a quote higher. Every quote from Sawyer Remodel Miami is a written line-item price before any work starts. The number you approve is the number you pay. No change orders, no “we found something” upcharges.
All work carries our 365-Day Done Right Promise in writing. If a hinge binds, a drawer misaligns, or a seam opens within a year of install, we come back and fix it. Free. Good work doesn’t need a sales pitch.
DIY or Call Us?
Two things you can safely do yourself: tighten hinge screws on a sagging door, and check/replace shelf pins if a shelf is uneven. That’s it.
Anything involving cabinet box anchoring, drawer slide replacement, or countertop work should be left to someone who does this daily. The dangerous part isn’t the cabinet itself. It’s what’s behind it: electrical lines for outlets and under-cabinet lighting, supply lines for the sink and dishwasher, and gas plumbing if you have a gas range. Cutting into a wall in a Miami kitchen without knowing where the Romex sits is how people get hurt. We’ve seen DIY slide replacements strip out the cabinet rail because the original installer used undersized screws, and then the drawer drops four inches into the cabinet below it, breaking the face frame.
If your Oldcastle cabinets are failing and you want to know whether it’s a $200 hardware fix or a full rip-and-replace, call (850) 801-8046. We’ll tell you straight. Free estimate, no sales tax on the honesty.
FAQs
Expect 10 to 15 years from Oldcastle Classic cabinets in this climate, and 15 to 20 from the Pro line if they were installed with proper ventilation. Miami’s humidity plus daily cooking steam is harder on finishes than the brand’s original lifespan estimates, which are calibrated for dryer climates. If you’re at year 12 and the doors are swelling along the bottom edge, you’re on the realistic end of the curve. Call (850) 801-8046 and we’ll tell you if replacement or repair makes sense for your kitchen.
Yes to both. Drawer slides, hinges, shelf pins, and hardware are repairable or replaceable without touching the cabinet box. A warped door, a cracked face frame, or a cabinet box pulling off the wall usually means that component needs to be replaced. The honest answer depends on what we see when we inspect it, and that inspection is free.
A standard cabinet-and-counter remodel in Miami takes 2 to 4 weeks from demo to final walkthrough. The exact timeline depends on cabinet lead times, countertop fabrication, and what we find behind the walls. We give you a written timeline before work starts, and we don’t disappear mid-project. You’ll get photo updates before and after every phase.
We stock common Oldcastle repair items on the truck: hinges, drawer slides, shelf clips, and hardware at both the 45mm and 52mm bore spacing. For full door or cabinet replacement, we order the specific series components matching your kitchen. You don’t have to chase parts yourself. Call (850) 801-8046 with your cabinet label info and we’ll source what’s needed.
Written by Luca Romano, Owner & Lead Contractor, Sawyer Remodel Miami at Sawyer Remodel Miami, serving Miami and nearby areas.
