Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
PGT Fence Installation: The Miami Owner’s Guide
PGT fence installation in Miami typically runs $4,130 to $10,620 for a complete vinyl or aluminum fence system on a standard city lot. That’s the installed price with posts set in concrete, panels hung, and gates hung and adjusted, not just the materials dropped in your driveway. Most Miami homeowners find out their PGT fence has failed the hard way: a gate that won’t close after a storm, a post that’s leaning after heavy rain, or a panel that cracked loose from the frame during hurricane season. You don’t need a new fence every time, but when panels start going, patching one at a time gets expensive fast. We’ll walk you through what’s worth fixing and what’s worth replacing.
Key Takeaways:
- Full PGT fence installation in Miami averages $4,130 – $10,620 depending on linear feet and materials.
- Most failures trace back to two things: salt air eating aluminum post brackets, or improper post depth for Miami’s sandy soil.
- We stock PGT-compatible hardware on our trucks, which means less waiting when a gate or panel gives out.
- Sawyer Remodel Miami is an independent installer, not a PGT dealer or affiliate.
Which PGT Models This Applies To
PGT makes two fence lines we install most in Miami: their vinyl privacy fence systems and their aluminum picket line. The vinyl panels come in 6-foot sections with interlocking tongues, and the aluminum is a 5/8-inch picket on a 4-foot or 6-foot rail system. Both share the same weak point down here: the post-mount hardware. Salt air in neighborhoods like Shenandoah, Morningside, and Coconut Grove eats zinc-coated steel brackets in five to seven years, even while the vinyl or aluminum panel itself looks fine. If you’re unsure which line you have, check the top rail for a molded PGT stamp, or measure the post spacing. Vinyl panels sit on 72-inch centers; aluminum line posts usually run on 48-inch centers. For replacement parts, OEM PGT hardware is fine but pricey. We use OEM panels for color match and quality aftermarket brackets with a heavier powder coat than factory, because the aftermarket coating holds up better against Miami salt air. It’s one of the few places we’ll steer you away from a brand name and toward the better-performing part.
Styles & brands we work with
Signs Your PGT Fence Installation Is Failing
- A gate that scrapes the ground when it swings. This usually means the hinge post has started leaning, not that the gate itself is the problem. Miami’s limestone and sand mix doesn’t grip a 24-inch post in a storm surge the way northern clay does, and a shallow post will drift over time.
- White or gray powder around the aluminum hardware. That’s galvanic corrosion from salt air, and once it’s visible, the bracket has lost most of its structural steel. The panel may look perfect, but the connection is on borrowed time.
- Panels that rattle in high wind. PGT vinyl panels expand and contract a lot in Miami heat, and after a few summers the interlocking tabs can wear loose. You’ll hear it first on corner sections where two panels meet at an angle.
- Posts that shift when you lean on them. A properly set post shouldn’t budge. If it moves, the concrete footing has cracked or the hole was dug too shallow for Miami’s soil, usually under 24 inches when code and common sense say 30 to 36.
- Stains or scaling on the panel surface. This is cosmetic for vinyl, but on aluminum it’s the first sign the powder coat has failed and the metal underneath is oxidizing. In Miami’s humidity, that progresses to pitting within a year.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Your installed PGT fence in Miami is the number above: $4,130 to $10,620. The spread comes down to linear feet, material choice, and how many gates you’re working with. A 100-foot vinyl run with one gate sits near the bottom of that range. A 200-foot aluminum fence with two gates and a tough post-setting day sits near the top. What you get from Sawyer Remodel Miami for that price: removal and haul-off of the old fence, pressure-treated posts set in concrete at 30 to 36 inches, new panels or pickets hung and leveled, all gates hung on adjustable hinges and adjusted to close clean, and a written line-by-line price before the first post hole is dug. We put that price in writing first. If it’s not done right after we leave, the 365-Day Done Right Promise says we make it right, in writing, no argument at the door.
What drives the price:
- Linear feet: more fence, more material and more post holes.
- Gate count and width: a 4-foot gate is easy. A 10-foot driveway gate needs a heavier post and a better hinge kit.
- Old concrete removal: if prior posts were set in a full concrete footer, that’s demo time and it’s charged separately.
- Access: if we’re hand-carrying 80-pound panels through a narrow Coral Gables side yard, that’s labor the quote accounts for.
DIY or Call Us?
You can safely handle a few things yourself: adjusting a gate hinge, tightening a latch plate, hosing down salt buildup. Those are maintenance items. Replacing a post or a full run of panels is a different job. The danger isn’t dramatic, it’s the domino effect: a fence post pulled up by a tropical storm gust becomes a projectile, and vinyl panels in high wind are basically sails. Florida wind load means this isn’t a weekend post-hole-digger job the way it is other places. We’ve pulled up more than one “newly installed” fence in Little Havana where the posts were set at 18 inches with one bag of quick-set. That fence was never a fence. It was a suggestion. If you want to see if we’re the right crew, call (850) 801-8046 and get a written price. Good work doesn’t need a sales pitch, and neither do we.
FAQs
A properly installed PGT fence lasts 15 to 20 years in Miami, with vinyl panels often outlasting the hardware by a few years and aluminum picket fences running closer to 20 when the powder coat is maintained. Salt air is the main aging factor, so inland neighborhoods like Westchester get a few more years than oceanfront properties. If you’re replacing a fence that failed in under 10 years, the install depth or hardware was probably the cause, not the panel material. Call (850) 801-8046 for an exact quote; estimates are free.
Yes, when the issue is isolated to one post, one panel, or a gate hinge, a repair makes sense and runs a few hundred dollars, not thousands. If you’re chasing three or more separate failures across the fence line, replacing the full run is usually cheaper per linear foot than piecemeal repairs. We’ll tell you which one you’re looking at before any work starts. Call (850) 801-8046 for an exact quote.
A typical Miami residential fence takes two to three days from removal through final gate adjustment, with weather as the main variable during afternoon storm season. We set posts in concrete on day one, let them cure, and hang panels on day two. You’ll have before-and-after photos and a live arrival time the whole way through. Call (850) 801-8046 for an exact quote.
Yes, we stock PGT-compatible post brackets, hinge kits, latch hardware, and common vinyl and aluminum panel sizes on our trucks for repair calls. If a color or profile isn’t on hand, we order it and give you a straight answer on lead time. We also keep parts for KraftMaid, Cambria, and Silestone lines, though our fence work runs through PGT-spec materials most often. Call (850) 801-8046 for an exact quote.
Written by Luca Romano, Owner & Lead Contractor, Sawyer Remodel Miami at Sawyer Remodel Miami, serving Miami and nearby areas.
